- Slovenčina
- English
Technical publications
Diploma work:
Analysis of influence of impact at the point of continuous belaying on safety of belay chain at the high altitude employments, Košice, 2002
Minimum of dissertation thesis:
Contribution to problems of bridge crane structure durability from the wear point of view from skewing – application at guiding structure of bridge crane, Košice, 2004
Dissertation thesis:
Technical papers:
2003
- Peter BIGOŠ, Ján BURÁK, Peter BOCKO: The influence of cross-travelling of the bridge crane on the wheel contact stress, LOADO, 2003
2005
- Peter BIGOŠ, Ján BURÁK: Experimental part of theoretic-experimental model of bridge cranes skewing for durability applications, the VIII. conference of postgraduate students at faculty of engineering of slovak technical universities, Novus scientia, Košice, 2005
- Peter BIGOŠ, Ján BURÁK: Theoretic-experimental model of bridge crane skewing, Acta Mechanica, 2005
2006
- Peter BIGOŠ, Ján BURÁK: Modelling of horizontal load of bridge crane, Lifting devices in theory and practice, 2006
- Peter BIGOŠ, Ján BURÁK: FEM – Bridge cranes – Modelling of skewing load, ITCAD, 3/2006
- Ján BURÁK: Contact problem using FEM – Bridge crane guiding structure and loading from skewing, ITCAD, 4/2006
- Peter BIGOŠ, Ján BURÁK: FEM modelling of load of bridge crane from skewing by STN 270103, Strojárstvo, 10/2006
- Ján BURÁK: Contact surfaces of bridge crane wheel and rail during skewing, In: Zdvihací zařízení v teorii a praxi : web magazine, 2/2006
2007
- Ján BURÁK, Jozef KUĽKA, Martin MANTIČ: Contribution to prediction of guiding structure durability of bridge cranes from skewing load, Zdvíhací zařizení v teorii a praxi, Brno, 2007
- Peter BIGOŠ, Ján BURÁK, Ondrej TANYASI: Load spectra of bridge crane guiding structure from skewing, DIS, 2007
- Ján BURÁK: Load processing for durability prediction of structures – spectral and correlation analysis – matlab, Zdvíhací zařizení v teorii a praxi, Brno, 2007
2008
- Ľubomír JASENOVEC, Ján BURÁK, Peter BIGOŠ, Ján JADLOVSKÝ: Network control system of bridge crane. In: Zdvihací zařízení v teorii a praxi : web magazine, 1/2008
- Ján BURÁK: Elimination of bridge crane skewing – position of crane during setting of strain gauge data acquisition system, Zdvíhacie zariadenia v teórii a praxi, Tatranská Lomnica, 2008
2009
- Ján BURÁK: Postprocessing data FEM – biaxiality indicator, factor of safety and S-N curves for lifetime prediction, 25. International departments seminar of transport, civil and agricultural machines, Čingov, 2009
- Ján BURÁK: Postprocessing data FEM – biaxiality indicator, factor of safety and S-N curves for lifetime prediction, Zdvihací zařízení v teorii a praxi : web magazine, 2/2009
2011
- Marek SCHNEIDER, Ján BURÁK: Creation of geometrical etalon of wing, 1.scientific conference of PhD students, Collection of contributions, ISBN: 978–80–553–0665–0, Košice, 2011,
- Ján BURÁK, Marek SCHNEIDER: Carrier of removable truck superstructures NVN – S3, Magazín Stavebné stroje a mechanizácia, ISSN 1336 – 958X, 05–06/2011
- Ján BURÁK, Marek SCHNEIDER: Innovation of removable truck superstructures, Zdvihací zařízení v teorii a praxi : web magazine, ISSN 1802–2812, 1/2011
- Marek SCHNEIDER, Ján BURÁK: Creation of geometrical etalon of wing, 1.scientific conference of PhD students, Strojárstvo Extra, ISSN 1335 – 2938, 7–8/2011
- Ján BURÁK: System of attachment of supporting wheels, Strojárstvo, ISSN 1335 – 2938, 8/2011
- Ján BURÁK, Marek SCHNEIDER: Structural design of removable truck superstructures NVN – S3, Stavebné materiály, ISSN 1336 – 7617, 05/2011
- Oskar OSTERTAG, Ján BURÁK: Strength analysis of tollgate, Transfer inovácií: web magazin, ISSN 1337–7094, 19/2011
- Oskar OSTERTAG, Ján BURÁK: Experimental and strength analysis of tollgate, In: MMaMS 2011 : Modelling of Mechanical and Mechatronical Systems: proceedings of the 4th international conference : Herľany, Slovakia, ISBN 978–80–553–0731–2
- Ján BURÁK: Structural Solution of the Support Wheel Attachment Systems to Rotational Airplane Platform, Zdvihací zařízení v teorii a praxi: web magazin, ISSN 1802–2812, 2/2011
- Ján BURÁK, Marek SCHNEIDER: Analysis of contact surfaces of wheel and rail of bridge crane during skewing, Transfer inovácií, web magazin, ISSN 1337–7094, 21/2011
2012
Book publications:
2010
- Ján BURÁK, Oskar OSTERTAG: Fundamentals of structural elements design with finite element method, Elfa, Košice, 2010
- Peter BIGOŠ and collective: Numerical and experimental methods for increasing of performance and for durability evaluation of drives and constructions of selected transport machinery, Typopress, Košice, 2010
- Ján BURÁK, Jozef KUĽKA: Design of steel structures I – solution manual, Košice, 2010
2013
- Ján BURÁK, Karol SEMRÁD: Fundamentals of design structure of technical, technological and energetical devices, Elfa, Košice, 2013
Technical labours and experts reports:
- Verification of bridge crane parameters after instalation. Checking of supported structure for condition of vibration dampening capacity in connection with STN 270103, Košice, 2003, (member of solution team)
- Tensometer measurement of crane track C-D, D-H / 14–40, push furnaces DP HRM, Košice, 2006, (member of solution team)
- Bearing of crane undercarriage together with bearing of crane travel clearance as well as bearing of crane track beams for LH1 and LH2 crane tracks in steel mill I – continual casting – with regard to analysis of excessive wear of rails and crane travel wheels, Košice, 2006, (member of solution team)
- Tensometer measurement of crane track in hall J-L, columns no.50–51, in hot strip mill of hot rolling mill DP USS Košice, 2006, (member of solution team)
- Tensometer measurement of crane tracks in hall B-C, collonade B, columns no.69–70, in expedition plant of hot rolling mill USS Košice, 2006, (member of solution team)
- Tensometric measurements of beams on cranes 04/2, 04/3 at finishing DP and determination of the time their safe operation, Košice, 2008, (member of solution team)
- Professional preview of crane track beams in the hall C – E, collonade E, among selected columns no. 50–75, in the expedition plant of hot rolling mill and in the division plant of hot rolling mill, Košice, 2008, (member of solution team)
- Installation of strain gauge detectors to Blast furnace 1 USS Košice, Košice, 2009, (member of solution team)
- Continual measuring of local stress values on shell of the Blast furnace 3 USS Košice and continual measuring of total shell expansion, Košice, 2010, (member of solution team)
- Guideline for service and maintenance – Carrier of removable truck superstructures NVN – S3, Košice, 2012
- Static calculation and associate documentation for horizontal rope belaying system and relevant structural elements for working at height and over free depth, Košice, 2012, (project guarantor)
- Safety project and associate documentation for horizontal rope belaying system and relevant structural elements for working at height and over free depth, Košice, 2012, (project guarantor)
- Structural design of control cabine attachment of work platform KJF 320, Košice, 2012,
- Structural modification of work platform arm PM – 0160, Košice, 2012,
Citations:
- Miroslav HAMI: Control of traversing crane with elimination of the contravention at technological level, Diploma thesis, Department of Cybernetics and Artificial Intelligence, TU, FEI, Košice, 2006,
- Miloš GOMBÁR: Optimization of bridge crane control with elimination of bridge torsion, Diploma thesis, Department of Cybernetics and Artificial Intelligence, TU FEI, Košice, 2008,
- Miroslav REICHL: Crane anti-skew system minimizing wear of wheels, Diploma thesis, Fakulty of Electrical Engineering, Department of Control Engineering, ČVUT Praha, 2011
Projects:
Participation in projects VEGA:
- VEGA 1/2196/05 Logistic elements and systems in material flows and informatic flows, their innovations and using in computational and experimental methods for increase their lifetime.
- VEGA 1/0146/08 Material flows and logistics, inovative processes in structures of manipulation and transport devices as active logistics elements with aim to increase their responsibility.
- VEGA 1/0356/11 Innovation processes in driving element structures of transport devices, machines and optimization of material flows and logistics to aim of energy saving and increasing responsibility for aplication requirements in practice.
Utility models, patents and trade marks
- Carrier of removable truck superstructures NVN – S3 B, 2012
Industrial Property Office of the Slovak Republic
- Carrier of removable truck superstructures NVN – S3, 2011
Certificate – Industrial Property Office of the Slovak Republic – Utility model
- Changeable transport frame, 2011
Industrial Property Office of the Slovak Republic
Certificate – Industrial Property Office of the Slovak Republic – Utility model
Other publications
- Ján Burák: Mont Blanc 7/2006, Halo TU, 2–2006/2007
- Ján Burák: Expedition Elbrus 7/2007, Halo TU, 2–2007/2008
- Ján Burák: Slovak expedition Peak Lenin 2008, Halo TU, 2–2008/2009
- Ján Burák: Summer with Lenin, Jamesák, 5/2008
